The user can still control the priority of the boot entries of individual USB devices in the UEFI Boot Order list. Updated the Intel processor microcode to the latest version. Addressed an issue that would result in incorrect or corrupt UEFI boot order data, or malformed JSON output from the HP RESTFul API HpServerBootSettings resource. Updated the RESTful API HPE BIOS Attribute Registry resources to match the latest BIOS/Platform Configuration options. This issue does not impact servers with memory configured on multiple processors. ... "The software will not be installed on this system because the required hardware is not present in the system or the software/firmware doesn't apply to this system." Addressed an issue where the system may properly indicate that a DIMM has experienced a high rate of corrected memory errors in the Integrated Management Log (IML), but the DIMM's status may incorrectly be reported in the iLO GUI as healthy. This revision of the System ROM includes the latest revision of the Intel microcode which, in combination with operating system and hypervisor updates, provides mitigation for the L1 Terminal Fault – OS/SMM (CVE-2018-3620) and L1 Terminal Fault – VMM (CVE-2018-3646) security vulnerabilities.  These vulnerabilities may allow unauthorized disclosure of information residing in the L1 data cache to an attacker with local user access via a side-channel analysis.  These security vulnerabilities are not unique to HPE servers and impact any servers utilizing impacted processors.  Note that this server is NOT vulnerable to L1 Terminal Fault – SGX (CVE-2018-3615), also known as Foreshadow, because this server does NOT support SGX.Â. Addressed an issue where industry standard SMBIOS Type 9 entries for PCIe Slots attached to a not installed processor did not exist. Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee. Addressed an issue in the HP RESTful API BIOS support that resulted in internal HTTP sessions between BIOS and iLO left open during boot. Product description The HPE ProLiant DL380 Gen9 Server delivers the best performance and expandability in the Hewlett Packard Enterprise 2P rackportfolio. The user can set the boot priority of this Generic USB Boot entry, and retain this priority for use with USB devices that might be installed in the future. Addressed an issue where HP Smart Array error messages are not logged to the Integrated Management Log (IML). © Copyright 2020 HP Development Company, L.P. Obtain a formatted USB Key media. dear all i have lost SmartStart CD for HP Proliant DL380 G9 , where i can download that software becouse i can;t install windows if not use - 5964269 ... Lost SmartStart for DL380 Gen9 ‎01-30-2017 02:59 AM. This issue does not affect any other processor models. 4. Examples: "LaserJet Pro P1102 paper jam", "EliteBook 840 G3 bios update", HP Support Solutions Framework - Windows Service, localhost Web server, and Software, Remove "HP Support Solutions Framework" through Add/Remove programs on PC, Operating System - Windows 7, Windows 8, Windows 8.1, Windows 10, Browser - Google Chrome 10+, Internet Explorer (IE)10.0+, and Firefox 3.6.x, 12.0+. This issue does not impact systems configured with Intel Xeon E5 v3 processors. HPE ProLiant BL Server Series. Addressed an issue where the system would continue to run (server did not perform a Blue Screen or reset as expected) when a Non Maskable Interrupt (NMI) occurs when using Microsoft Windows 2008 or Microsoft Windows 2008 R2 when Processor x2APIC Support is configured to Enabled (the default value). Added support for an FTP command in the Embedded UEFI Shell. QuickSpecs HPE ProLiant DL380 Gen9 Server Standard Features Page 7 RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may Hewlett packard enterprise, dl380 generation9 gen9, dl380 generation9 gen9 overview, oneview global dashboard. This System ROM revision should be considered the minimum revision required for use with 64 GB LRDIMMs in systems with any memory channels containing 3 DIMMs. Intel has only seen this under synthetic testing conditions and is not aware of any commercially available software exhibiting this behavior. This security vulnerability is not unique to HPE servers and impacts any systems utilizing impacted processors. Added pre-boot OHCI USB support. Addressed an issue where certain optional PCIe video adapters would fail to work properly when using a Linux operating system. The command can be used to display the Secure Boot keys and certificates. This type of PCI-express card implementation is more common with older PCI-express expansion cards. By default, the system will now only scan for Fibre Channel boot targets that are configured in each adapter. Updated the System Utilities BIOS/Platform Configuration (RBSU) Fibre Channel/FCoE Scan Policy option to default to Scan Configured Targets only. HP's Virtual Agent can help troubleshoot issues with your PC or printer. Addressed an issue where a server configured with a Trusted Platform Module (TPM) and Microsoft Windows 2012 R2 BitLocker might incorrectly prompt the user for a recovery password following a warm reset. This revision of the System ROM contains updated support for Windows 2019 when using the optional HPE TPM Module. A Medium level CVE has been assigned to this issue with ID CVE-2018-3640. This release provides updated system ROM images for the latest maintenance releases of HPE ProLiant DL380 Gen9/DL360 Gen9 (P89) Servers, Hewlett Packard Enterprise Software License Agreement, https://support.hpe.com/hpsc/doc/public/display?docId=hpesbhf03912en_us, https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00060570en_us, https://newsroom.intel.com/press-kits/security-exploits-intel-products/, Red Hat Enterprise Linux 6 Server (x86-64), SUSE Linux Enterprise Server 11 (AMD64/EM64T), 5e4c5ee3406b33c3b0e1fe5d1c9920f2d7511375d52ef81988992d4aac1bb050. You only need to do this once to guarantee a faster support experience at any time. This issue only effects the server when configured in UEFI Boot Mode. This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for an Intel sighting where the system may experience a machine check after updating to the latest System ROM which contained a fix for an Intel TSX (Transactional Synchronizations Extensions) sightings. Addressed an issue where the Date and Time may be set incorrectly when using the Date and Time option from the BIOS/Platform Configuration (RBSU) when the Daylight Savings Time option is enabled. Addressed an issue where the server may assign incorrect ACPI NUMA proximity allocations for servers configured with two or more processors and with memory only attached to a single processor socket potentially leading to non-optimal performance. HP can identify most HP products and recommend possible solutions. Hi community, since one week we have new DL380 Gen9 servers. Addressed an issue that may result in losing the existing UEFI iSCSI Software Initiator boot options if any of the connection parameters (LUN, Remote Port, IP address, login credentials) change. Systems with microprocessors utilizing speculative execution and speculative execution of memory reads before the addresses of all prior memory writes are known may allow unauthorized disclosure of information to an attacker with local user access via a side-channel analysis. Addressed an issue where a system could become unresponsive when booting to Linux Operating when serial output was enabled from the operating system and the iLO Virtual Serial Port was the only enabled UART. This also addresses an issue in configuring the server UEFI Boot Order using HP OneView and the HP RESTful API. HPE ProLiant Gen9 Servers - Software and Driver Download. If you have the SPP version, please share so that we can share the content report which gives the detailed information of respective SPP. Deploy the data center standard This revision of the System ROM includes the latest revision of the Intel microcode which provides mitigation for an Intel sighting where under complex microarchitectural conditions, software using Intel TSX (Transactional Synchronizations Extensions) may result in unpredictable system behavior. This issue only impacts systems configured with Intel Xeon v4 Series processors. In this case, the user must set Switch 5 to the ON position to disable these passwords. Detection completed. These passwords should support a maximum length of 31 characters. My opérating system is Updated help documentation for System Utilities and the UEFI Embedded Shell. The list of recommended drivers for your product has not changed since the last time you visited this page. Added support for HPE 128GB SmartMemory Load Reduced DIMMs (LRDIMMs). Sign up for driver, support & security alerts. Addressed an issue where the system may fail to boot from UEFI iSCSI Software Initiator boot options that has iSCSI Initiator or Target configured using static IPv6 addresses. A similar issue could be seen with other PCI-express expansion cards implemented with a PCI device behind a PLX PCIe-to-PCI bridge. Please consult the following advisory for additional details. Get advice, answers, and solutions when you need them.   Only compatible Firmware and Drivers for the product will be displayed on this page. Addressed an issue where the SATA port numbers reported in the System Utilities BIOS/Platform Configuration (RBSU) would not properly match the port numbers reflected by labels on the system. Addressed an issue with the fwupdate Embedded UEFI Shell command that may cause the system to become unresponsive during some firmware updates. HP PROLIANT DL380 GEN9 CHIPSET DRIVERS WINDOWS 7 (2020). Addressed an issue where the system may not properly report and log errors to the Integrated Management Log (IML) detected on the optional HPE Dual SD Card option. Enhanced PCIe resource allocation so that systems configured with multiple PCIe expansion devices may in some cases no longer report a "276 Option Card Configuration Error" during system boot due to not having enough I/O resources to support what is requested by the installed devices. This could cause such issues as an inability to boot using the PCIe adapter. This issue has no impact on the thermal operation of the server and is simply an issue with the temperature displayed during boot. This issue does not affect systems where the UEFI iSCSI Boot Configuration is configured through the System Utilities BIOS/Platform Configuration (RBSU). The list of all available drivers for your product is shown above. The file can either be a UEFI Network Boot Program (NBP), or an ISO image containing a UEFI bootable OS image. These options are only available in UEFI Boot Mode. Note that the Integrated Lights-Out (iLO) Firmware had a similar issue. The HPE ProLiant DL380 Gen9 Server delivers the best performance and expandability in the Hewlett Packard Enterprise 2P rack. User guide abstract, embedded applications active health. HP supports printers, pc's, tablets and calculators . Addressed several issues with the legacy USB support (USB support before the operating system loads) when the system is configured for Legacy Boot Mode. Select your desired files and a list of links will be sent by email. Addressed an issue where the Intel NIC DMA Channels (IOAT) option could not be properly be configured from the Embedded UEFI Shell via the Sysconfig command. Give it a try on your PC! Addressed an issue where the One Time Boot Menu includes network boot options for devices even when network boot is disabled for those devices. 5. Added a new System Utilities BIOS/Platform Configuration (RBSU) Fibre Channel/FCoE Scan Policy menu that allows the user to select how the UEFI BIOS will scan for valid Fibre Channel (or boot from SAN) boot targets. This tool will detect HP PCs and HP printers. How does HP use product data collected with this service? Addressed an issue where the +/- keys in the BIOS/Platform Configuration (RBSU) Boot Options menu were not functioning properly when configuring the server through a BIOS Serial Console Session. The users may optionally change the time format to Local Time which removes the use of the time zone. Addressed an issue where the system might experience a Machine Check Exception under heavy stress conditions when configured with an Intel Xeon E5-2609 processor. Driver detection is now available for the desktop download experience. I have just installed Server 2012 R2 on my HP ProLiant DL380 G5. Finding your Serial Number Added support for boot from URL (HTTP or FTP) functionality in UEFI Boot Mode. This issue only affects systems configured in Legacy Boot Mode. Skip the confusion of sorting through all of our drivers and let us detect only the ones you need. Sign in. Also added a new GrayOut property that can be used to describe some dependency scenarios. Updated the HP RESTful API HP BIOS Attribute Registry resources to match the latest BIOS/Platform Configuration options. Updated to the latest support modules for Intel Trusted eXecution Technology (TXT) including the Intel Authenticated Code Module (ACM) and Intel Secure Initialization (SINIT) module. The HPE ProLiant DL380 Gen9 Server delivers the best performance and expandability in the Hewlett Packard Enterprise 2P rack portfolio. The command can be used to download files from HTTP and FTP servers. This issue is NOT unique to HP servers. Addressed an issue where the system may experience a Linux kernel panic when booting from a SATA optical drive attached to the embedded SATA controller when the SATA controller is configured for Dynamic Smart Array B140i support. Addressed an issue where the server could experience a Red Screen reported as a General Protection Error when a user-initiated driver recover/rebuild operation is issued to the HP Dynamic Smart Array B140i controller. Addressed an issue where the System Utilities BIOS/Platform Configuration (RBSU) USB Boot Options setting may not properly allow the server to boot from the internal SD card before a USB key when SD is higher in the priority list. This revision of the System ROM includes the latest support for Intel Trusted eXecution Technology (TXT) which provides mitigation for CVE-2019-0151. This issue does not occur when booting in UEFI Boot Mode. Addressed an issue where the system may display a Red Screen error and become unresponsive from the Embedded UEFI Shell when interrupting the ping command via a CTRL-C key press. This new entry is used as a place holder for any USB device that is bootable in UEFI. This can result in the iLO Event Log indicating multiple events for HTTP session logins. Enhancements: By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement. Addressed an issue where the server could become unresponsive during boot or from the Embedded UEFI Shell when a Block I/O device such as a USB key or hard drive has a corrupt FAT32 file system. Added support for Trusted Platform Module (TPM) 2.0 Firmware flash updates. The number of active cores would not be reported properly by some utilities. Addressed an issue where the Legacy Boot Order menu in the System Utilities BIOS/Platform Configuration (RBSU) might have incorrect port numbers when the server is configured in Legacy Boot Mode. Addressed an issue where the system may shutdown when a fatal error occurs in the pre-OS environment (such as the System Utilities or Embedded UEFI Shell) and not log any entry into the Integrated Management Log (IML). Addressed an issue where the System Utilities BIOS/Platform Configuration (RBSU) option for Embedded UEFI Shell Auto Startup Script Network Location does not accept an NSH file name containing upper case characters. This could take up to 3 minutes, depending on your computer and connection speed. Here, we are showing the process to patch HP ProLiant DL380 (p) Gen8 and Gen9 server. Upgrade Requirement:Critical - HPE requires users update to this version immediately. The option is enabled by default and was enabled automatically with previous revisions of the BIOS. DL380 Gen9, HP SSA on WinSer2012 can't find controllers. 0. of. This revision of the System ROM includes the latest revision of the Intel microcode which addresses an issue where the system could experience an unexpected reset or shutdown with no errors logged to the Integrated Management Log (IML). Addressed a rare issue in which the user was not prompted or was not prompted correctly when exiting the UEFI System Utilities. Attempting to boot from the Generic USB Boot entry will result in attempting all UEFI bootable USB devices that are available in the system. Addressed an issue where the Administrator Password would not be properly configured from the Embedded UEFI Shell Sysconfig command. Addressed an issue where the fwupdate Embedded UEFI Shell command and the Firmware Update pre-boot application could hang during a firmware update and not successfully flash the device. The hp proliant dl380 gen9 server was released a few weeks ago in late. Addressed an issue where the system health LED would remain blinking AMBER (indicating a degraded state) due to an installed power supply not being plugged in after the power supply had been plugged in.